2003 – 2005 model year Matrix vehicles produced BEFORE or AFTER the VIN shown below. Part numbers vary based on Matrix vehicles produced before or after the VIN (refer to the Parts Information table in this TSB). Front Doors Repair Procedure Refer to steps 1 – 6 in the Technical Information System (TIS): 2003, 2004, or 2005 model year Matrix Repair Manual: Engine Hood/Door: Front Door: Overhaul.
NOTE: Use the same procedure for the LH side as the RH side. 1. Place the window in the down position. 2. Remove the window run. Completely remove the double-sided tape remaining on the frame. 3. Thoroughly clean the door frame using a white body shop towel and Kentt Acrysol. NOTE: Do NOT use red shop towels. These towels contain silicone. 4. Install the door glass window run. A. Position the glass run at the No. 2 and No. 3 corners of the door frame and then attach the middle part of the run. B. Insert the glass run into the window run channels.
NOTE: - Do NOT apply water or lubricant to the glass run when inserting it into the door. - Make sure the glass run fits securely into the holes of the door frame. 5. Using a plastic pry tool, press the glass run into the upper portion of the door frame to securely adhere the double-sided tape. 6. Fully close the window. model year Matrix Repair Manual: Engine Hood/Door: Rear Door: Overhaul. NOTE: Use the same procedure for the LH side as the RH side. 1. Place the window in the down position. 2. Remove the door glass window run. Completely remove the double-sided tape remaining on the frame. 3. Thoroughly clean the door frame using a white body shop towel and Kentt Acrysol.

Source

Related Tags: body shop, double sided tape, down position, front doors, glass window, holes, information system, information table, lh side, lubricant, rh, shop towel, shop towels, side 1, silicone, technical information, toyota matrix, upper portion, vin, wind noise