REMOVE FOLLOWING PARTS:
1. Remove knee panel and steering wheel shroud.
INSTALLING CRUISE CONTROL:
1. Locate 40 pin pass through connector left of steering column clipped to metal support bracket. Connect “White” wire from cruise harness to position 8 of 40 pin connector “Gray” wire for cruise input.
2. Connect “Red and Green” wires from cruise harness to position 7 of 40 pin connector “Pink” wire for ignition power.
3. Locate diagnostic connector below knee panel. Connect the “Black” wire in the cruise harness to “Black” wire for ground.

source

Related Tags: Chevrolet, chevrolet uplander, control 1, cruise instructions, diagnostic connector, ground source, installing cruise control, knee panel, pin connector, pink wire, steering column, steering wheel, support bracket, uplander, wheel