Removal Of Automatic Locking HubCaution: The brake shoe and brake drum grease is a special type and should not be substituted when it is necessary to change the grease, replace the hub body and brake assembly and/or brake drum 2. Remove axle bolt with washer. 3. Remove hub body. a. Remove the mounting nuts. b. Using a brass bar and hammer, tap on the bolt heads and remove the cone washers. Caution: Do not tap the hub body when removing the cone washer. If the stud bolt is damaged or deformed, replace with a new one. c. Pull off the hub body. 4. Remove brake subassembly. a. Using a screwdriver, pry out the snap ring. Caution: Never strike brake shoe with the screwdriver, always apply the screwdriver to the brake drum to remove the drum ring. b. Remove the brake subassembly. Caution: Don’t drop the brake shoe subassembly. 5. Remove brake drum. Using torx socket, remove the screw and the drum.

Source

Related Tags: automatic locking hubs, bolt heads, brake drum, brake shoe, brass bar, caution, grease, hammer, hub body, nuts, screw, screwdriver, snap ring, stud bolt, tap, Toyota, toyota truck, wheel, wheel hub