Conventional Suspension Exploded View Of Rear Suspension Assembly. 2WD Legacy. Performing the following procedure.
1. Remove rear seat cushion and backrest.
2. Raise and support vehicle.
3. Remove rear wheels.
4. Disconnect brake hose from brake caliper.
5. Remove lower and upper strut mount retaining bolts, then the strut assembly.
6. Mount strut assembly in a suitable spring compressor. Ensure projections on compressor are seated on inner diameter of spring.
7. Compress spring until tension is relieved from spring seats.
8. Remove strut rod self-locking nut using a suitable socket wrench and spanner wrench tool No. 926510000 or equivalent.
9. Remove upper strut mount.
10. Slowly release spring tension, then remove coil spring, dust cover and helper from strut body.
11. Reverse procedure to install, noting the following: a. Mount coil spring with flat face toward lower spring seat. b. Use caution not to scratch piston rod. c. Install strut rod with new locking nut. d. Refer to Figs. 7 and 8 for torque values. e. Bleed brake hydraulic system. Pneumatic Suspension

Source

Related Tags: brake caliper, brake hose, coil spring, flat face, inner diameter, lower spring, piston rod, rear strut, rear wheels, release spring, socket wrench, spring compressor, spring seat, spring seats, spring tension, strut assembly, subaru legacy, subaru legacy wagon, suspension assembly, torque values