Removal All Vehicles
1. Remove the rear door interior trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
2. Remove the access hole watershield.
3. Reconnect the window regulator and window switch electrical connectors and position the front door window to access the glass clamp bolt.
4. Disconnect the window regulator and window switch electrical connectors
5. Loosen the window glass clamp bolt.
6. Tape the window in the full up position, then lower the window regulator downward until it reaches the stops at the bottom of the regulator track.
7. Remove the interior door handle bolt.
8. Disconnect the rear door latch assembly electrical connector. many waters gallery
9. Rotate the push button rod downward and remove it from the rear door latch assembly.
10. Remove the 3 rear door latch assembly-to-rear door module bolts.
NOTE: Make sure that the interior door handle does not get scratched when it is passed through the rear door module.
11. Remove the 8 bolts and position the rear door module aside. Five Hundred and Montego Vehicles
12. Remove the tape and lower the window glass.

Download

Related Tags: , , , , , , , , , , , , , , ,