The AirDog® Fuel Air Separation system is a Premium replacement lift pump and filtration system for the Dodge Cummins diesel engine. A complete installation kit is included. The AirDog® delivers clean fuel to the engine free of virtually all air/vapor and at a positive flow. Thus, allowing the engine “test cell” performance and efficiency, while in “real world” use. The AirDog® FP-100 flows 100 GPH and is recommended for stock and slightly modified 6.7L Cummins Diesels up to 550 HP. The AirDog® FP-150 is recommended for highly modified 6.7L Cummins Diesels up to 1,200+ HP. PureFlow products are manufactured with a personal touch, unsurpassed attention to detail and the most stringent quality control.

The AirDog® draws fuel from the fuel tank at a constant flow, removing water, particulates, and air/vapor. A regulated pressurized flow is maintained to meet the engine’s varying fuel demands. The separated air/vapor and excess fuel not needed by the engine are returned from the AirDog® to the fuel tank.
NOTE: The pictures used in this manual are for example only and may not be exactly the same as your truck.

The installation of your AirDog® can be made relatively easy by following the steps outlined in this manual, and:
1. Inventory the package components completely. Notify PUREFLOW® TECHNOLOGIES, INC. immediately of any parts missing or damaged.
2. Read the installation manual completely. Understand how the system operates and installation recommendations before beginning installation.
3. The installation recommendations contained herein are suggested installation guidelines only. Individual installations may vary.
4. If any installation procedure is uncertain, contact PUREFLOW® TECHNOLOGIES, INC for technical assistance.

source

Related Tags: , , , , , , , , , , , , , , , , , , ,