Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:- • Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). • Safety (eye protection, rechecking torque procedure, etc.). • Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). • Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
Please see your Toyota dealer for a copy of this document.
1. Remove Battery Cable. (a) Protect fender before starting. (b) Do not touch the positive terminal with any tool when removing cable. (c) Remove the negative battery cable. (Fig. 1-1) 2. Vehicle Disassembly. (a) Remove the OE mirror. (1) Disengage the two claws and remove the mirror cover from the mirror base. (Fig. 2-1) (2) Pull the lever in the direction indicated by the arrow shown in the illustration and slide the inner rear view mirror assembly upward to remove it. (Fig. 2-1) (b) Using panel removal tool remove map light assembly from headliner. (Fig. 2-2) (1) Disconnect the map light connector. (c) Disengage both driver side and passenger side sun visor holders from the roof by rotating counter clockwise between 60 to 120°. (Fig. 2-3) (1) Do not completely remove visor holders from headliner. (d) Using panel removal tool, pry DRIVER SIDE visor mount cover off from visor mount. (Fig. 2-4) (1) DO NOT fully remove cover.

Source

Related Tags: , , , , , , , , , , , , , , , , , , ,