Installation Procedure for this body spacer:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body air intake assembly.
3. Remove (2) nuts from the throttle body and (2) studs from manifold. (Ref. “C”)
4. Remove gasket and clean surfaces.
5. Install power plate with (2) gaskets.
A. Locate one gasket between the throttle body and power plate.
B. Locate second gasket between power plate and manifold.
6. Install (2) bolts and washers using Step 3 as an example.
7. Inspect & Test the throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjusting.
8. Reinstall the throttle body air intake assembly using Step 2 as an example.
9. Reconnect battery cable. Enjoy!

source

Related Tags: 2 nuts, air intake, bolts, cables, cruise, Dodge, dodge caravan, gasket, gaskets, negative battery cable, plymouth voyager, power plate, step 2, step 3, studs, surfaces, throttle body spacer, throttle linkage, voyager 3