Gauge bezel can be painted using a plastic safe paint.
1. Remove two screws in top of factory bezel. Use small screwdriver in the slotted area of the light switch knob to release tension on spring clip while pulling forward to remove knob.
2. Pull forward on bezel from the inside bottom, detaching clips from the dash.
3. Install aluminum brackets as shown in Figs. 1 and 2.
4. Place new gauge bezel in dash as a test fit. Adjust brackets so that screw holes align. Brackets can be rotated or bent to align holes.
5. Once brackets are aligned, remove new gauge bezel and install gauges per manufacturer’s instructions (gauges are press fit).
6. Install new gauge bezel.
SERVICE
For service send your product in a well packed shipping carton to the address below. Please include a note explaining what the problem is along with your phone number. Please specify when you need the product back. Normal repairs take approximately ten (10) working days. If you are sending product back for Warranty adjustment, you must include a copy (or original) of your sales receipt from the place of purchase.

Source

Related Tags: aluminum brackets, bezel, figs, Ford, ford mustang, gauge bezel, gauge pods, light switch, paint, phone number, press fit, purchase source, sales receipt, screw holes, screwdriver, screws, shipping carton, spring clip, tension, warranty