The installation instructions step:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air cleaner housing from throttle body.
3. Remove 5/16” bolt (Ref. “C”) & stud (Ref. “D”) from throttle body.
4. Remove (2) 6mm bolts from throttle linkage bracket and save.
5. Move the throttle body forward then remove the gasket and clean the surfaces.
6. Install the power plate with (2) gaskets, (1) 5/16” bolt, and (1) 5/16” stud & nut. (Ref. “C” & “D”)
A. Install one gasket between the power plate and manifold.
B. Install second gasket between the power plate and throttle body.
7. Install (2) linkage plates using (2) 6mm flat head screws and throttle linkage bracket using (2) saved 6mm bolts. (Refer to Step 4)
8. Inspect & Test throttle linkage for full open & closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjusting.
9. Reinstall air cleaner housing. (Refer to Step 2)
10. Reconnect battery cable. Enjoy

source

Related Tags: , , , , , , , , , , , , , , , , , , ,