You must have either the instrument cluster with the 20 segment LCD display, or the Multi-Information Display (MID), or the Navigation display. StealthOne Requirements for 5 Series (E39):
Steering wheel buttons to control StealthOne operation and setup.
Valentine One® radar locator.
Small flat head screwdriver
Phillips head screwdriver
T20 Torx screwdriver (to remove the sun visor) – available at Home
Depot and Sears or can be ordered from Jaric Design.
Pliers (for the 3M T-Tap connector)
10 mm socket or wrench (to remove the glove box)
IMPORTANT: Your BMW owner’s manual specifically states that the installation of non-BMW approved accessories such as radios, radar detectors, telephones, etc. may cause damage to the vehicle, affect the vehicles safety, interfere with the electrical system of the vehicle or affect the validity of the BMW Limited Warranty. StealthOne is not an approved BMW accessory.
The StealthOne product includes the following items: • The StealthOne module • A 2 ft RJ-11 modular Power Cable. This cable connects between the Valentine One® accessory port and StealthOne. • A second 2 ft RJ-11 modular Interface Cable with an additional black wire attached. The single wire connects to your automobile’s I-BUS and the modular cable serves as the auxiliary programming port for future programming and/or accessories. • Tie wraps • Red 3M T-Tap connector.
If you are unfamiliar with automotive electrical systems, see a mechanic or car-stereo installer. Some knowledge of automotive electrical systems and of interior trim removal is necessary to do it yourself. The instructions listed below assume that you already have your Valentine One® hard-wired into the overhead console. The installation of your Valentine One® is not covered in this installation guide.

Source

Related Tags: , , , , , , , , , , , , , , , , , , ,