The new Audi A6 – the most progressive vehicle takes the lead Design and performance are the main driving elements on its way to the top position. Furthermore, the new Audi A6 embodies the consequent continuation of the familiar Audi brand values, sports appeal, progressiveness and intrinsic quality, which are evident in the fourth generation of this sporty business limousine.
(more…)

• 0 Comments

This Quick Reference Guide will give you a quick and clear overview of the operation and function of your vehicle. You’ll also tind descriptions of some additional features. Keep in mind that not all vehicle features are described in this Quick Reference Guide. This Quick Reference Guide is not a substitute for the Owner’s Manual. The Owner’s Manual contains detailed information about all your vehicle’s features plus important warnings and information about passenger safety. Please read it carefully.
(more…)

• 0 Comments

This B&M Short Throw Shifter has been designed to work on most 1996-2000 Audi A4, 2000 Audi S4, 2000 Audi A6, and 1996-2000 Volkswagen Passat models. It has been engineered to greatly reduce shift throw and improve shifter feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Short Throw Shifter. Installation of the B&M Short Throw Shifter can be accomplished by anyone with minimal mechanical experience.
(more…)

• 0 Comments

Instructions
Before removing any parts, park the car on a secure, stable and level surface, loosen (but do not remove) the wheel lug nuts, jack the vehicle up and place the car on four stable jack stands or use a professional vehicle lift. We recommend having two people available for certain steps of the installation.
Front Install Instructions
1. Securely support both front corners of the car.
2. Remove front wheels.
3. Disconnect link on ride height sensor to prevent damage.
4. Disconnect hydraulic suspension line and drain in to pan. Remove line from bulkhead mounting plate
5. Remove the Lower Front shock clevis bolt that attaches the fork of the shock to the lower front control arm.
(more…)

• 0 Comments

This performance kit installation steps on Audi A3: 1. Disconnect the negative terminal from the vehicle battery. 2. Remove the plastic engine cover. (Fig. 1) 3. Unclip & remove the engine breather hose from the intake pipe. (Fig. 2) 4. Remove the small vacuum hose from under the breather hose on the intake pipe. Follow the vacuum hose & remove the hose from the inlet manifold. Blank off the pipe on the manifold using the small rubber cap supplied. (Fig. 3) 5. Remove the small rubber hose from the side of the intake pipe as shown. (Fig. 4) 6. Unclip & remove the auxiliary air pump feed pipe from the air box as shown. (Fig. 5) 7. Unclip & remove the plastic intake pipe from the throttle housing. (Fig. 6) 8. Remove the air box securing bolt & carefully pull the air box assembly out of its mounting grommets. Remove the air box (more…)

• 0 Comments

The installation of AWE Cold Cone Box for Volksgagen Mk5, CC and Audi A3, TT vehicles:
Step 1: On 2006-08 FSI engines, remove the entire engine cover assembly and inlet ducting. Leave the duct that bolts to the radiator support in place. Remove the MAF sensor from the engine cover assembly. On 2008.5-> TSI engines, remove the factory airbox, intake tubing, and MAF sensor housing. Leave the duct that bolts to the radiator support in place. Remove the MAF sensor from the sensor housing.
(more…)

• 0 Comments

Engine, removing and installing Note: All cable ties opened or cut during engine removal must be reinstalled at the same locations. Remove engine without transmission toward the front. Drained coolant must be stored in a clean container for disposal or reuse. Always replace seals and gaskets. Do not open coolant circulation system.
(more…)

• 0 Comments

The AWE Tuning RSK04 Fueling Kit picks up where the Audi RS4 leaves off! AWE Tuning worked very closely with GIAC to establish the proper mechanical parameters which would overcome limitations in the RS4 that GIAC documented during chip development. The RS4 Mass Air Flow (MAF) sensor and fuel injectors are inappropriate for use on an S4, and we also had our sights set even higher than chipped RS4 territory with the RSK04 kit.
(more…)

• 0 Comments

Key Messages
• The A4 product line is critical to Audi of America’s growth in the USA, and the S4 supports this by expanding the line’s sportiness.
• The new S4 is a sports car offering an impressive driving experience, leading technologies, and every-day suitability.
• Audi Drive Select (adjustable engine/throttle mapping, suspension damping, and dynamic steering) is a benchmark in the segment and industry.
• All-new version of the 3.0 TFSI supercharged V6 provides excellent acceleration and efficiency in all driving situations.
• New 7-speed S tronic dual clutch transmission for faster precise gear changes.
• New optional quattroSport rear differential enhances agility.
• S4 will be offered exclusively as a sedan in the USA.
• USA market launch is Fall 2009, as a 2010 model year vehicle.
(more…)

• 0 Comments

This Service & Airbag Reset Tool allows you to reset your car’s Airbag Fault Light & Service (Oil Service & Inspection Service) Indicators on VW/Audi/Seat/Skoda manufactured from 1994 to the latest one that using CAN-BUS protocol, please read the Compatible Vehicles for detail models.
(more…)

• 0 Comments