The SoundGate VWZNAUX1 lets you connect a Zune TM digital media player directly to the factory radio in the Audi/Volkswagen vehicles listed below. The VWZNAUX1 supplies power, charges your Zune device, and allows for remote control of all Zune device functions (remote sold separately).

Features
The SoundGate VWZNAUX1 utilizes sophisticated microprocessor control, ultra-reliable surface-mount construction, and advanced software design to fl awlessly integrate with Audi/Volkswagen audio systems. Your Zune device’s audio can be selected from your factory radio’s controls.
(more…)

• 0 Comments

Common Problems
1. I am having trouble connecting with an ‘02 Audi A4.
This vehicle does pose connection issues with most aftermarket tools. Please continue to retry the connection.
2. I am having trouble getting good data rates on a specific controller.
Audi/VW consolidated sensors into groups. Some sensor groups can update at slower rates then others. Typically, this is text-based sensors on non-critical models like Telephone or Climate control. To resolve this select only those sensors that are important to you until you reach a saturation point for the data throughput.
(more…)

• 0 Comments

Volkswagen and Audi transfer the delivery instruction as well in the message type VDA 4905/1, in the ODETTE message type DELINS according to VDA 4905/2 as in EDIFACT DELFOR. The description of the VW/Audi specific use of the delivery instruction in the format VDA 4905/2 is available in the Internet for download, too. The VDA 4905/1 is transmitted for delivery instructions of the factories of the marque Volkswagen by the IVZ Wolfsburg (station ID R11) and for delivery instructions of the marque Audi by the IVZ in Ingolstadt (station ID R21). The delivery instructions of VW de Mexico and of the marque SEAT are routed outgoing from the IVZ Puebla (R66) or IVZ Barcelona (station ID R41) trough the IVZ in Wolfsburg to the partners within the area of the VDA.
(more…)

• 0 Comments

For cars with a THREADED gear knob (early Audi,VW,Seat to approx 2005) follow the instructions from point 2
For cars with a SLOTTED gearknob (approx 2005 on) follow the instructions from point 8
1. If fitting to an Audi TT, first using a T20 screwdriver, undo all 8 of the T20 screws surrounding the gear stick. Other cars with a screw on gearknob, skip to point 2..then lift the ring away to expose the rubber underneath
2. Unscrew the existing gearknob….and remove the rubber gaitor and aluminium spacer (if applicable) from the gear stick.
(more…)

• 0 Comments

Installation Instructions:
1. Refer to the illustrations and location chart for correct size shift cups.
2. Using a T20 Tork Plus bit, remove the existing OEM plastic shift cup and discard.
3. Using a T20 Tork Plus bit, install the correct size replacement aluminum shift cup.
4. Make sure the replacement shift cup is properly rotated so that the tabs will retain the valve body components securely.
(more…)

• 0 Comments

With the purchase of this SCHROTH asm harnessbelt, you have chosen a sophisticated restraint system, which represents a further advance in harness restraint technology. Extensive research, testing and field experience has shown it to offer, when properly installed and worn, high levels of protection in head-on collisions.
(more…)

• 0 Comments