Installation Instructions Procedures:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake assembly.
3. Remove throttle body intake box and save bolts.
4. Remove (3) bolts from throttle body.
5. Remove bolts from throttle linkage bracket and save.
6. Install power plate using (3) 6mm x 60 bolts and (3) 6mm flat washers. (Ref. “A”)
(more…)

• 0 Comments

Thank you and congratulations on the purchase of a Pacbrake replacement Dodge elbow to increase ex- haust flow. Read the entire installation manual carefully to ensure you can complete the installation once started. Check that your Pacbrake kit is correct for the application and contains all the necessary parts as shown in the photo.

INSTALLATION INSTRUCTIONS:
1. Exhaust Elbow Installation: All vehicles, remove the two capscrews that attaches the cast elbow to the header pipe. 1994-1998 vehicles, remove the V clamp between the elbow and the turbo charger. Remove the cast elbow. Removal of the 5 bolt flange is required. 5 new fasteners will be supplied. 1999-2002 vehicles, remove the 5 capscrews securing the elbow to the turbo charger. Remove the cast elbow, 5 new fasteners will be supplied.
(more…)

• 0 Comments