Additional Parts needed when you have a Dragon Filter, 1 x 3″-3″ Coupler / 2 x 3″ Clamp Remove bolts securing OEM air cleaner box, loosen clamps on OEM rubber intake pipe. Remove the coolant transfer / PCV hardline from from OEM intake and engine. Mark the coolant tranfer hose origins, install the 10mm hose supplied in kit to those 2 locations. Remove the OEM rubber intake tube, remove the OEM air cleaner box by pulling upwards. Wipe the throttlebody clean of any grease, install the 2.5″-3″ coupler onto throttlebody, secure with OEM clamp. Insert Weapon*R intake pipe into the 3″ end of the 2.5″-3″ coupler, secure with clamp. Measure the OEM PVC hose, replace with supplied 10mm (more…)

• 0 Comments

Read and understand these instructions BEFORE attempting to install this product.
1) Getting started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Disconnect negative battery terminal.
d) If engine has run within the past two hours let it cool down.
(more…)

• 0 Comments

The JG Edelbrock short shifter uses a stock style distance pin riding on two DU self-lubricated bearings. ACCESSORIES & INSTALLATION ITEMS: Our billet shifter knob PN 4709 is the ultimate choice to complement your new JG Edelbrock shifter. The threads on this shifter (M10×1.5) are compatible with the stock or any stock replacement shifter knob.
(more…)

• 0 Comments