Chevrolet LCT1000–LCT2500, Ford 47RH / 47RE / 48RE, Dodge E4OD / 4R100 Transmission removal, Installation And testing
Removal
Check and record all codes and actions of your transmission before transmission is removed. This will help if you still have problems after installation. Damage to your transmission may have been caused from some other external source.
(more…)

• 0 Comments

The steering system consists of solid steering shaft with a lower joint assembly. Stealth and 3000GT models are equipped with a Supplemental Restraint System (SRS) that includes an air bag and clockspring located in the steering column. WARNING: On Stealth and 3000GT, before doing any repairs, disconnect and shield battery ground. Disconnect SRS connector at control unit. Use caution when working around steering column (air bag could deploy).
(more…)

• 0 Comments

Kelderman Air Ride has just developed its most recent system in a line of quality air ride suspension systems. This system was developed to improve the ride of the new 2003 Dodge 3/4 & one-ton pickups. There are many advantages to equipping your truck
with air ride suspension:
• Improves the ride of the truck
• Adjustable ride height
• Increases load carrying capacit.
(more…)

• 0 Comments

FRONT STRUT REMOVAL
1. Loosen the front wheel lugnuts.
2. Raise the vehicle and support it on jack stands.
3. Remove the front wheels.
4. Disconect the air line fitting and unplug the electrical connectors for the height sensor and solenoid.
5. Then vent the air from the bag.
6. Be sure to mark the position of the strut at the bottom where it bolts to the spindle.
7. Remove the nuts and bolts from the strut.
8. Be sure to disconnect the brake hose from the strut.
9. Now remove the upper three nuts where it attaches to the shock tower.
10. Now dismount the strut from the vehicle.
(more…)

• 0 Comments