1. For ease of installation of your Banks Ram-air intake system, familiarize yourself with the procedure by reading the entire manual before starting work. This manual contains 16 pages of copy, illustrations and parts listing. If any pages are missing from this manual please call Gale Banks Engineering immediately for a replacement.
(more…)

• 0 Comments

The Edelbrock E-Force Competition Air Intake System is intended only for use on 2010-2011 Chevrolet Camaro SS’ that have been equipped with the Edelbrock E-Force Competition Supercharger System. This intake is not compatible with naturally aspirated cars, nor with those using a different supercharger. While this system can also be used with the #1597/1598 street legal packages, installation may violate emission regulations in some areas.
(more…)

• 0 Comments

The AEM Brute Force Intake System is the result of extensive development on a wide variety of cars. It is the most advanced short pipe air intake system on the market. Each system is specifically engineered for its particular application. All AEM Brute Force Intake Systems deliver maximum performance gains through the lightweight, all- aluminum, mandrel-bent tubing that is tuned in both length and diameter. The tube (more…)

• 0 Comments

- Stock air intake cleaner and air ducts shown in this picture. Before getting started with the installation, disconnect the negative battery terminal and remove the strut tower bar from the engine compartment.
- Loosen and remove the 3- 14mm bolts and 1- nut shown on the passenger side.
- Remove the 3- m14 bolts and 1- flange nut located on the drive side strut bar bracket.
- Once all 6- 14mm bolts and two flange nuts have been removed, continue to pull the strut tower bar out of the engine compartment.
- Removing engine covers: Remove the 2- 10mm flange nuts and the 2-10mm bolts from the lower engine cover.
(more…)

• 0 Comments

The AEM Cold Air Intake System is the result of extensive development on a wide variety of cars. It is the most advanced Cold Air Intake System on the market. Each system is specifically engineered for its application. All AEM Cold Air Intake Systems deliver maximum performance gains through lightweight, all-aluminum, mandrel-bent tubing that is tuned in both length and diameter. The aluminum will not crack in extended use like plastic. The tube length and diameter are matched for each specific engine to give power over a broad RPM range. Unlike plastic systems that use a continually diverging cross-section, we take advantage of the acoustical energy in the inlet duct to promote cylinder filling during the intake valve-opening event. Every intake is coated with a high-gloss, heat-reducing Zirconia based powder coating.
(more…)

• 0 Comments

The AEM Short Ram Air Intake System is the result of extensive development on a wide variety of cars. It is the most advanced short pipe air intake system on the market. Each system is specifically engineered for its application. All AEM Short Ram Air Intake Systems deliver maximum performance gains through lightweight, all- aluminum, mandrel-bent tubing that is tuned in both length and diameter. The aluminum will not crack in extended use like plastic. The tube length and diameter are matched for each specific engine to give power over a broad RPM range. Unlike plastic systems that use a continually diverging cross-section, we take advantage of the acoustical energy in the inlet duct to promote cylinder filling during the intake valve-opening event.
(more…)

• 0 Comments

The Honda Element AEM Cold Air Intake System is the result of extensive development on a wide variety of cars. It is the most advanced cold air intake system on the market. Each system is specifically engineered for its application. All AEM Cold Air Intake Systems deliver maximum performance gains through lightweight, all-aluminum, mandrel-bent tubing that is tuned in both length and diameter. The aluminum will not crack in extended use like plastic. The tube length and diameter are matched for each specific engine to give power over a broad RPM range. Unlike plastic systems that use a continually diverging cross-section, we take advantage of the acoustical energy in the inlet duct to promote cylinder filling during the intake valve-opening event. Every intake is coated with a high-gloss, heat-reducing Zirconia based powder coating.
(more…)

• 0 Comments

The AEM Brute Force Intake System is the result of extensive development on a wide variety of cars. It is the most advanced short pipe air intake system on the market. Each system is specifically engineered for its particular application. All AEM Brute Force Intake Systems deliver maximum performance gains through the lightweight, all- aluminum, mandrel-bent tubing that is tuned in both length and diameter. The tube length and diameter are matched for each specific engine to give power over a broad RPM range. Every intake is coated with a high-gloss, heat-reducing Zirconia based powder coating. This special blend of powder coating helps reduce heat penetration, which in turn reduces the temperature of the inlet air charge. The cooler inlet air temperature translates to more power during the combustion process because cool air is denser than warm air. The air mass flow to the engine is increased because of the increased airflow and reduced inlet temperature, which translates to more power.
(more…)

• 0 Comments

Read and understand these instructions BEFORE attempting to install this product
1) Getting Started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) If engine has run with in the past two hours let it cool down.
d) Disconnect negative battery terminal. ~:
e) Raise front of truck and support with properly rated jack stands.
f) Remove passenger side, front tire.
(more…)

• 0 Comments

The AEM Performance Air Induction System is the result of extensive development on a wide variety of cars. It is the most advanced short pipe air intake system on the market. Each system is specifically engineered for its particular application. All AEM Short Ram Air Intake Systems deliver maximum performance gains through lightweight, all-aluminum, mandrel-bent tubing that is tuned in both length and diameter. The tube length and diameter are matched for each specific engine to give power over a broad RPM range. Unlike systems that use a continually diverging cross-section, we take advantage of the acoustical energy in the inlet duct to promote cylinder filling during the intake valve-opening event.
(more…)

• 0 Comments