When installing the timing belt, be sure to align all alignment marks on the belt with corresponding marks on the sprokets. If incorrectly installed, interference between pistons and valves may occur.
Timing Belt Removal
1. Remove timing belt guide. (MT vehicles only)
2. If alignment mark (a) and/or arrow mark (which indicates rotation direction) on timing belt fade away, put new marks before removing timing belt as shown in procedures below.
(more…)

• 0 Comments

FRONT INSTALLTION INSTRUCTIONS
1. Block the rear wheels of the vehicle. Raise the front of the vehicle and support the vehicle with jack stands under the frame rails. Remove the front wheels and tires and set aside. Position a hydraulic jack under the front axle and raise the jack until the front suspension begins to compress.
2. On both sides of the vehicle, scribe alignment marks on the adjustment cam and axle bracket at the lower link to axle attachment point for later reference. See Photo 1
(more…)

• 0 Comments