User-ready child restraint tether strap anchors will be provided in passenger cars in the 2000 Model Year, and in light trucks in the 2001 Model Year. Tether straps improve the performance of child restraints in collisions. Because of the publicity that has accompanied the “Fit for a Kid” Program, owners of earlier products are expected to approach dealers for the free provision and installation of the anchor hardware. Daimler Chrysler Corporation is offering child seat tether anchors for the selected vehicles listed above. Each tether anchor is packaged in a kit containing all necessary parts and a detailed instruction sheet.
(more…)

• 0 Comments

For rear disc pad removal and installation, DO NOT disconnect brake hose from caliper (wire aside). Replace all pads on an axle if wear indicator on any pad contacts rotor or if pad is worn to within .03″ (.8 mm) of pad backing.
Removal (”A”, “B”, “C”, “K” & “U” Series)
1. Remove 2/3 of brake fluid from master cylinder reservoir. Raise and support vehicle. Remove wheel. Using “C” clamp, compress caliper piston until it bottoms out in its bore.
(more…)

• 0 Comments