The NEW BMW 7 Series door lock (Shown Below) – You will not be able to decode the door lock with the tool because the angle of the lock will prevent you from obtaining the correct readings. However, you will be able to decode the boot lock on this model of car successfully.
Note: in some models you have to apply a little bit of force in order to open the car but not to much because excessive force can bend the half key bits.
(more…)

• 0 Comments

This shock is pressurized to 250 psi nitrogen. This pressure is not an adjustable feature of the shock. Unless there is a leak, the shock should not normally lose pressure. If the shock damping becomes soft or mushy (after an extended period of time or number of miles) the shock may need to be serviced which includes shock oil and a nitrogen charge. In this situation, re-pressurizing the shock alone may not improve the action of the shock. The shock should be returned to Works Performance Products, Inc., or to a qualified shop that has the appropriate tools, training and nitrogen handling equipment.
(more…)

• 0 Comments

The instructions step:
• Place the bike on the center stand and remove the current shock absorber.
• Place the Hyperpro shock in the bike, type 461 with reservoir as shown in the picture. If your shock is equipped with the optional hydraulic preload adjuster place the banjo bolt of the HPA to the right side of the bike.
• Use the two added clamps and rubber blocks to mount the reservoir on the sub frame
(more…)

• 0 Comments