Installation
(1) Disconnect the vacuum hose, recirculation hose and remove the factory air bypass valve.
(2) Mount the GReddy Blow Off Valve on to the supplied adaptor using the provided gasket and hardware
(3) Remove the rubber sleeve off from the factory bypass valve and install it on to the GReddy Blow off valve adaptor.
Venting out to atmosphere Type
(1) Remover the plastic pipe out of the factory suction pipe and install the provided aluminum plug with factory hose clamp.
(2) Install the GReddy Blow Off Valve as shown using the factory hose clamps.
(3) Reconnect the vacuum using the factory hose clamps.
(4) Stick the emblem to the top housing.
(more…)

• 0 Comments

The Mag-Hytec pan is designed to fit the factory Dodge #727 transmission body as supplied as original equipment. However, in some applications, or because of the use of certain factory options and/or after market equipment, there may be clearance problems between your Mag-Hytec pan and other vehicle components. It is the responsibility of the vehicle owner and installer to ensure that there is no contact between the pan and other moving or fixed vehicle components. Contact with any vehicle component or the modifying of the Mag-Hytec pan voids the warranty. Mag-Hytec assumes no liability, expressed or implied, for damage or injury to persons or property.
(more…)

• 0 Comments