1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel including the a/c vent. (Figure A) 3 Remove (4) 10 MM bolts securing the radio. Unplug and remove the radio.
DOUBLE DIN RADIO PROVISION STACKED ISO MOUNT UNITS
*Note: Refer also to the instructions included with the aftermarket radio.
1 Snap the Double DIN Trim plate into the rear of the factory radio trim panel. (Figure A)
DOUBLE DIN RADIO PROVISION STACKED ISO MOUNT UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
(more…)

• 0 Comments

1. Disconnect the negative battery terminal to prevent an accidental short circuit.
2. Unclip and remove the center console trim panel. (Figure A)
3. Unclip the center dash trim panel.
4. Remove (4) screws securing the radio. Disconnect and remove the radio.
5. Remove (3) screws securing the radio rear support bracket and remove the bracket.
(more…)

• 0 Comments