Instructions
1. Remove old fitting
2. Retap existing hole with tap provided until tap bottoms out. (See Figure 1.)
3. Clean hole of any remaining chips
4. Install Sonnax adapter and tighten lightly. Leading edge of Sonnax cooler line adapter will seal where tap bottomed. (See Figure 2.)
(more…)

• 0 Comments

1 ) Set aside a couple of cups of the portland cement to be used for the final finishing stages of the repair.
2 ) Cut or chisel the length of the crack creating a notch 1” wide and ―” to 1” deep. Examine the edges of the notch – they should not be smooth. Roughen up the edges if necessary so that the repair will bond firmly to the existing floor.
3 ) Wet the notched area thoroughly.
4 ) Mix the portland cement with the terrazzo chips to create a consistency which is not runny nor is it thick like dough. A consistency you can hold in your hand.
(more…)

• 0 Comments