Step 1-Unpack QuickLIFT kit and verify contents.
Remove all items from the packing tube. You should have the following before beginning:
* (2) Gas Charged Springs
* (4) 3/16″ multi-grip rivets – used on hood brackets
* (4) Self tapping high strength screws – used on fender brackets
* (4) Fender & Hood Steel brackets
* Printed Instructions
* Gas Spring locking clips (already installed on the gas spring ball ends – Remove before assembly – DO NOT LOSE, these are very small and disappear if dropped.)
(more…)

• 0 Comments

Neon Front Door Instructions:
1. Using a pick tool pry open the screw cover behind the interior door release lever and remove the screw.
2. Remove the screws in the armrest pocket and at the top of the door near the front.
3. For models with manual windows use a window crank removal tool to disengage the pin securing the window
crank and pull the window crank from the door. The triangle shaped piece that houses the side mirror
adjustment control lever will need to be pulled away from the door. Using a panel removal tool gently pry
the bottom of the plastic away from the door to release the fasteners and let it hang by the mirror control cables.
(more…)

• 0 Comments