Entries Tagged as 'failure'

Installation of a Performance Automotive group body lift will change the center of gravity and the handling characteristics of the vehicle. Because of the higher center of gravity and larger tires, the vehicle will handle and react differently both on and off road. You must drive it safely! Extreme care must be taken to prevent vehicle rollover or loss of control, which could result in serious injury or death. Avoid sudden sharp turns or abrupt maneuvers and always make sure all vehicle occupants have their seat belts fastened.
(more…)

Before you begin installing this seat riser, please read all installation instructions and warnings thoroughly. This seat is designed to be used on the model vehicles described above. Use of this riser on any other vehicle or failure to install this seat properly may result in an improperly mounted seat and could result in unexpected movement of the seat and loss of control of the vehicle, thereby placing the occupants of the vehicle and others in a potentially dangerous situation.
(more…)

Installation for 2001-2003 Acura 3.2CL Cold Air System:
1) Getting started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Disconnect negative battery terminal.
d) If engine has run within the past two hours let it cool down.
(more…)

Page 2 of 2«12
- 2000 Dodge Cummins MAP sensor - 2000 Dodge Cummins MAP sensor - 1997 pathfinder timing belt mark - connect mirror dimmer e36 - connect mirror dimmer e36 - webasto octavia 2 - Fiat Ducato X250 repair manual - webasto octavia 2 - webasto octavia 2 - nissan micra immobiliser wiring - 430n ipod - 430n ipod - 430n ipod - camshaft seal removal tool suzuki sidekick - st185 gearbox maxtorque