The program cassette in the Multi-Tester pro is the component which gives the diagnostic equipment its unique test performance. The program cassette can easily be changed to set the Multi-Tester pro up quickly for the diagnostic task at hand. The Multi-Tester pro software is available in two levels of functionality, Plus line and Pro line. This manual covers the operation of the Plus line cartridge. The Plus line cartridge has the following functions: engine DTC:s and monitor list, airbag DTC:s, ABS DTC:s and snapshots. This fault-finding instruction describes the serial application for trouble shooting via the diagnostic connector on Mercedes.
(more…)

• 0 Comments

This manual was written to help owners of /2 BMW motorcycles to service their bikes and keep them in running condition. When these motorcycles were made, they had very different electrical requirements to motorcycles today, and used equipment which today’s owner may not fully understand. Doug and Kees hope that this manual is useful to owners of these motorcycles and that it will help owners keep their bikes where they belong – on the road.
(more…)

• 0 Comments

Section 1: Repair instructions for E36 1. Connect DIS/MoDiC 3 tester to a vehicle and read out SRS module fault code memory. If the above mentioned SRS faults are set in the airbag control module, proceed with the repair. 2. Remove corresponding front seat. For a removal instructions refer to RA 52 10 000 , or RA 52 10 001 (sports seat) which can be found in the Technical Information System (TIS). 3. Disconnect vehicle’s battery. 4. Remove cable securing wire ties (1), unplug the belt tensioner connector (2) from the belt buckle assembly and from the (more…)

• 0 Comments