This performance kit installation steps on Audi A3: 1. Disconnect the negative terminal from the vehicle battery. 2. Remove the plastic engine cover. (Fig. 1) 3. Unclip & remove the engine breather hose from the intake pipe. (Fig. 2) 4. Remove the small vacuum hose from under the breather hose on the intake pipe. Follow the vacuum hose & remove the hose from the inlet manifold. Blank off the pipe on the manifold using the small rubber cap supplied. (Fig. 3) 5. Remove the small rubber hose from the side of the intake pipe as shown. (Fig. 4) 6. Unclip & remove the auxiliary air pump feed pipe from the air box as shown. (Fig. 5) 7. Unclip & remove the plastic intake pipe from the throttle housing. (Fig. 6) 8. Remove the air box securing bolt & carefully pull the air box assembly out of its mounting grommets. Remove the air box (more…)

• 0 Comments

1. Disconnect the negative terminal from the battery.
2. Remove the plastic cover from the air box assembly.
3. Remove the air box feed pipe from between the air box lid & slam panel intake scoop.
4. Unclip & remove the electrical harness plug from the MAS (Mass Air Sensor).
5. Unclip & remove the intake hose from the MAS.
6. Unclip the 3 hoses from the top of the air box assembly.
7. Unbolt & remove the two ignition amplifiers from the top of the air box lid.
(more…)

• 0 Comments