STEP 1
Roll both front windows completely down and then disconnect the vehicles battery. Read all instructions before proceeding to STEP 2.
NOTE: If you are installing a manual mirror do not disconnect the battery.
STEP 2
Remove the screw from the sail inner trim panel, using a Phillips head screw driver.
WARNING: Do not try to remove the sail inner trim panel after you remove the screw, as it is still connected to the door trim.This panel will be removed in Step 7.
(more…)

• 0 Comments

REMOVAL OF EXISTING MIRROR:
1. Have both windows in the down position. Remove the trim panel on both doors, start by removing two philips screws. One is located in the hand hold and the other is in the corner in front of the window. (note – there are two trim panel clips below the window).
2. Remove the foam insulation covering the stock mirror mounting nuts.
3. Support the stock mirror while removing the 3 mirror mount nuts and then remove the stock mirrors.
(more…)

• 0 Comments