INSTALLATION NOTES
1. Unless specified, mount all Sub-Frame components to vehicle before tightening any bolts.
2. Vehicle should be parked on a level surface with the
front suspension normally loaded.
MOUNTING INSTRUCTIONS
1. Locate existing slotted holes in vehicle frame rails directly above front axle.
2. Install Mounting Bracket (#3)RH, using three (3) 5/8″ x 2″ Capscrews (#10) Washers, and Nylock Nuts provided.
(more…)

• 0 Comments

Pre-installation Preparation
1. Verify kit contents.
2. Remove protective wrapping from inserts and place on a non-abrasive surface.
3. Remove the brackets and hardware from the box.

Remove Factory Grille & Frame Assembly
1. Open hood.
2. Remove eighteen 8mm nuts and bolts that hold the frame and grille in place.
IMPORTANT: Keep all hardware in a safe location. You will need this to reinstall your grille.
3. After removing the grille shell lay grille face down on a protective work surface such as a blanket.
(more…)

• 0 Comments