Included with your Poweraid Spacer is a sticker with a California Air Resources Board (C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of the engine compartment. Failure to do so may prevent you from passing a smog inspection.
Installation Procedure:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air cleaner assembly.
3. Using 1/2” socket, remove (4) 5/16” bolts attaching throttle body to manifold.
4. Lift throttle body.
(more…)

• 0 Comments

The installation instructions step:
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air cleaner housing from throttle body.
3. Remove 5/16” bolt (Ref. “C”) & stud (Ref. “D”) from throttle body.
4. Remove (2) 6mm bolts from throttle linkage bracket and save.
5. Move the throttle body forward then remove the gasket and clean the surfaces.
(more…)

• 0 Comments

Thank you for purchasing the Comptech Stainless Steel Exhaust system for the Acura NSX (1991-2006). All components have been designed and manufactured utilizing the latest in technology and materials. Please take a moment to read this instruction manual and warranty information page thoroughly before starting any work. Always work in a clean environment and use the appropriate safety equipment and tools to avoid any potential damage or injuries. Comptech recommends the use of a Genuine Acura Service Manual to supplement these instructions. All Comptech products are intended to be installed by a professional installer. Many stock parts are reused during installation. Do not damage or discard any pieces during disassembly or installation.
(more…)

• 0 Comments