Installation Step:
1. Disconnect the negative battery cable! Push the green tab on the crankcase breather tube, and disconnect it from the air intake tube. Loosen one hose clamp on each end of the air intake tube and remove it from the vehicle.
2. Remove the four bolts that hold the throttlebody to the intake manifold.
3. Install the ECONOAID Plate against the manifold with the logo facing the throttlebody. Next install the supplied gasket between the ECONOAID Plate and the throttlebody.
(more…)

• 0 Comments

Why our nitrous system is better:
• A complete 1999-2004 Mustang GT specific nitrous system. Everything is included in this kit for a safe, easy, plug and play installation.
• Adjustable from 75-175 horsepower. Safe enough for stock engines, powerful enough for racing use.
• Uses a custom made Ford fuel rail adaptor. This component gives easy access to the fuel system for nitrous system hook-up, especially the 2003-04 models.
• The 1999-2004 Mustang GT Nitrous System is activated at wide open throttle with advanced electronics that monitor your throttle position sensor (TPS); easy and safe activation.
• Unique nozzle design has “Active Fuel Control™” built in. This feature monitors bottle pressure and when the nitrous system is engaged, it adds or subtracts enrichment fuel so the engine never runs too rich or too lean.
(more…)

• 0 Comments

INSTALLATION
Note: This kit is designed to be used on 74-78 Mustang II and 73-80 Pinto/Bobcat spindles. It will also fit most dropped spindles and tubular “A” arm combinations. Check the fit before painting or plating any parts.
Painted, plated or modified pants are not accepted for return.
1. Starting with a clean spindle, mount the appropriate bracket {there is a right and left hand bracket) to the spindle using the bolts supplied. Note: brackets stamped R are right-passenger side and L are left-drivers side.
(more…)

• 0 Comments