Information on Upgrading Certain OnStar® Generation 5 Analog/Digital-Ready Systems to OnStar® Generation 6 Dual-Mode (Analog/Digital) This bulletin is being issued to provide dealer personnel with information and procedures to follow should an owner wish to upgrade their OnStar® Generation 5 analog/digital-ready system to an OnStar® Generation 6 Dual-mode (analog/digital) system.
Service Procedure
(more…)

• 0 Comments

This Owner’s Manual is designed to serve as your comprehensive guide to the wide range of functions and features provided by your BMW Radio and Information System. Thorough familiarity with this manual’s contents will assist you in becoming acquainted with the system’s extended array of special technical features. This Owner’s Manual contains descriptions of the following systems: BMW Car radio Onboard computer DSP – Digital Sound Processing* Cellular phone* You will find a summary of standard radio functions and operating instructions on pages 5 and 6. The control options for using the Multi-Information Display (MID) are listed on pages 3 and 4.
(more…)

• 0 Comments

Removal of stock system:
Separate the stock exhaust at the slip joint at the muffler, Remove rear exhaust from rubber hangers and remove the system from under the truck.
Using 9/16″ socket or wrench, remove two (2) nuts at the turbo flange on the engine and remove the stock down pipe.
Installation of MBRP Inc. Performance Exhaust:
Install down-pipe, do not fully tighten until all components are in place. (Installation tip: Temporarily hang the muffler and tail pipe in place using the two OEM rubber hangers and measure to the down pipe to determine the length needed, may require cutting.)
(more…)

• 0 Comments