Congratulations on your purchase of the AWE Tuning Exhaust System for the 00-> VW Golf/Jetta/New Beetle with 1.8T or VR6 engine. Exquisite build quality with industry leading performance distinguishes this exhaust system from all others. Our system also features complete T304 Stainless Steel construction, including the internal parts of the muffler. Installation of this exhaust can be completed on jack stands or ramps. Never work under a vehicle only supported by a jack. If you do not feel comfortable installing this system yourself, contact a local professional for installation.
(more…)

• 0 Comments

Thank you and congratulations on the purchase of a Pacbrake replacement Dodge elbow to increase ex- haust flow. Read the entire installation manual carefully to ensure you can complete the installation once started. Check that your Pacbrake kit is correct for the application and contains all the necessary parts as shown in the photo.

INSTALLATION INSTRUCTIONS:
1. Exhaust Elbow Installation: All vehicles, remove the two capscrews that attaches the cast elbow to the header pipe. 1994-1998 vehicles, remove the V clamp between the elbow and the turbo charger. Remove the cast elbow. Removal of the 5 bolt flange is required. 5 new fasteners will be supplied. 1999-2002 vehicles, remove the 5 capscrews securing the elbow to the turbo charger. Remove the cast elbow, 5 new fasteners will be supplied.
(more…)

• 0 Comments

All hardware should be tightened only enough to ensure safety during assembly. Fully tighten all hardware after entire assembly is completed.
1. Insert pairs of 5/8 inch x 7 1/2 inch and 5/8 inch x 8 inch hex bolts through holes in four 1/2 inch thick top bars from the kit. Place the 7 1/2 inch bolt/bar assemblies over the side rails of the vehicle ahead of the cab mount structure. Place the 8 inch bolt/bar assemblies over the side rails behind the cab mount structure.
(more…)

• 0 Comments