1. Turn the ignition OFF and disconnect the vehicle’s negative battery cable.
2. Disconnect the air temp. sensor electrical connection.
3. Loosen the hose clamps at the turbo inlet and the airbox outlet as shown.
4. Remove the intake tube from the vehicle as shown.
5. Loosen and remove the 10mm nut that retains the airbox to the vehicle.
6. Remove the complete airbox assembly from the vehicle as shown.
7. Remove the airbox mounting grommet as shown.
8. Install the large “L” bracket onto the heat shield with the provided hardware. NOTE: Do not tighten completely.
(more…)