Installation Instructions:
1. Refer to the illustrations and location chart for correct size shift cups.
2. Using a T20 Tork Plus bit, remove the existing OEM plastic shift cup and discard.
3. Using a T20 Tork Plus bit, install the correct size replacement aluminum shift cup.
4. Make sure the replacement shift cup is properly rotated so that the tabs will retain the valve body components securely.
(more…)

• 0 Comments

The installation instructions step:
1. Disconnect the negative battery cable! Loosen two hose clamps and remove the air intake tube. Separate the intake tube from the plastic clamp on the upper radiator hose. (If equipped).
2. Using a 10mm socket, remove the three nuts that hold the throttle body to the intake manifold.
3. Using a 4mm socket, remove the three studs that go thru the throttle body into the intake manifold.
(more…)

• 0 Comments