REMOVAL 1. REMOVE ENGINE UNDER COVER 2. DRAIN ENGINE COOLANT 3. DISCONNECT UPPER RADIATOR HOSE 4. DISCONNECT PS PUMP FROM ENGINE (a) Disconnect the 2 PS air hoses from the air intake chamber and resonator. (b) Remove the bolt holding the PS pressure tube clamp to the frame. (c) Remove the drive belt (See page SR–3). (d) Remove the bolt and nut, and disconnect the PS pump from the engine. 5. DISCONNECT A/C COMPRESSOR FROM ENGINE (a) Disconnect the A/C compressor connector. (b) Remove the drive belt (See page AC–17). (c) Remove the 4 bolts, and disconnect the A/C compressor from the engine. 6. LOOSEN FAN WITH FLUID COUPLING AND FAN PULLEYS 7. REMOVE (more…)

• 0 Comments

Read and understand these instructions BEFORE attempting to install this product.
1) Getting started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Disconnect negative battery terminal.
d) If engine has run within the past two hours let it cool down.
(more…)

• 0 Comments

Installation for 2001-2003 Acura 3.2CL Cold Air System:
1) Getting started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Disconnect negative battery terminal.
d) If engine has run within the past two hours let it cool down.
(more…)

• 0 Comments