Installation of this baseplate requires drilling 17/32” holes in the vehicle’s frame.
1. Read the General Instruction Sheet included with this baseplate.
2. The baseplate bolts to the bottom of the frame behind the bumper using six bolts supplied with the baseplate. Use of Loctite to secure the bolts is highly recommended. The vibrations and stresses of towing can cause bolts to loosen even with lock washers in the assembly.
(more…)

• 0 Comments

This pdf covers the removal & installation the timing case cover for Chevrolet S10 Pickup.
Removal
1. Disconnect negative battery cable. Remove P/S reservoir from radiator shroud. Remove upper fan shroud. Remove serpentine belt.
2. Remove generator with brackets and lay aside. Using Hub Puller (J-24420-B), remove crankshaft pulley hub. Remove oil pan. See OIL PAN. Remove front timing case cover bolts, and cover.
3. Using large screwdriver, remove crankshaft front seal. DO NOT distort timing gear cover during seal removal.
CAUTION: To prevent oil leakage, coat crankshaft pulley hub keyway with RTV sealant before installation.
(more…)

• 0 Comments