Below are brief explanations of the items listed on the Maintenance Service Schedule. Only a qualified technician should perform the work while following procedures in the new Range Rover Workshop Manual. Always use correct methods, tools, equipment and safety precautions. Some additional details and specifications are provided in the Owner’s Manual or the Workshop manuals.
(more…)

• 0 Comments

AS4660 Engine/Setting Locking toot Kit provides the special service tools required for timing belt replacement/engine timing applications on a range of U.S. domestic and import vehicles. Whereas some applications may just require the use oi a special tensioner tool to carry out the vital adjustment which ensures correct belt tension, others may additionally call for tools which lset and lock” the camshaft and crankshaft in timing position during belt changes. Full details are provided on the application coverage and usage of each tool in the kit. as well as a guide to certain procedures relevant to the application. However it is essential that the engine manufacturer’s service information or a credible proprietary manual is referred to when carrying out work on these applications.
(more…)

• 0 Comments

This Service & Airbag Reset Tool allows you to reset your car’s Airbag Fault Light & Service (Oil Service & Inspection Service) Indicators on VW/Audi/Seat/Skoda manufactured from 1994 to the latest one that using CAN-BUS protocol, please read the Compatible Vehicles for detail models.
(more…)

• 0 Comments

The lamp illustrated is an oil level low warning indicator and not a service interval indicator. When the engine oil is at the correct level, this lamp will automatically extinguish. Malfunction Indicator Lamp (MIL) The lamps illustrated above, are Malfunction Indicator Lamps (MIL) and not service interval indicators. When illuminated there is a problem with the vehicle. Refer to manufacturer’s documentation for further information.
(more…)

• 0 Comments

Simple step to light reset service for Renault Laguna. The reset button is located under the speedometer on the instrument cluster.
Switch ignition on.
Switch ignition on.
Press reset button until “spanner” symbol flashes.
Keep button depressed until “spanner” symbol stops flashing and remains
illuminated.
(more…)

• 0 Comments

Instructions:
• Ignition ‘Off’.
• Plug into car socket.
• Select program.
• Ignition ‘On’.
• Press memory key.
• LED ‘Off’ comes on again after approx. 10 seconds.
• Ignition ’Off’ + ‘On’.
• Car display cleared
(more…)

• 0 Comments

Common Problems
1. I am having trouble connecting with an ‘02 Audi A4.
This vehicle does pose connection issues with most aftermarket tools. Please continue to retry the connection.
2. I am having trouble getting good data rates on a specific controller.
Audi/VW consolidated sensors into groups. Some sensor groups can update at slower rates then others. Typically, this is text-based sensors on non-critical models like Telephone or Climate control. To resolve this select only those sensors that are important to you until you reach a saturation point for the data throughput.
(more…)

• 0 Comments