Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the “Accessory Installation Practices” document. This document covers such items as:- • Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). • Safety (eye protection, rechecking torque procedure, etc.). • Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). • Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
(more…)

• 0 Comments

Installation Preparation A. Check Kit Contents 1. Check kit for contents and damage. B. Vehicle Preparation 1. Use blankets to protect the front grille area and STOP the front seat area. 2. Set parking brake. STOP 3. Disconnect negative battery cable from battery. C. Removal Procedure: Air Filter Enclosure Assy. 1. Disconnect the Mass Air Flow (MAF) sensor connector from the MAF sensor. (Fig. C1) 2. Separate the fuel vapor feed hose and fuel vapor feed hose No.1 from the Vacuum Switching Valve (VSV) assembly. (Fig. C1, top-left detail) 3. Remove the VSV (more…)

• 0 Comments

Instruction manual for toyota yaris from Blitz Performance. This kit was produced for a standard stock car. In the case where this kit is installed on a vehicle other than stock, we are unable to guarantee its functional efficiency and durability of the product. Please be careful when installing this product, whereas no foreign objects or liquids get into it. The result of foreign materials getting mixed into the products may cause malfunctions in the products. During installation, in case of any uncertainties, it is important to have a factory service manual at hand. (more…)

• 0 Comments