A unit designed to provide integration of your vehicle’s built in mobile phone capabilities and your Bluetooth® enabled mobile phone. This kit is designed to make Bluetooth available in your car quick and easy! Simply find the phone connector in your car, plug the unit in, plug in the mic if your vehicle doesn’t already have one and your done!
Read the rest of this entry »

• 0 Comments

Wilwood components comprise the elements of the broadest coverage line of bolt-on disc brake kits available. Bolt-on brake kits consist of specially engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. Most kits are easily installed with the common hand tools used to perform routine brake service. A few kits do require some modifications to the spindle or axle to complete Read the rest of this entry »

• 0 Comments

Application for 2005 – 2011 Ford Mustan. Note: Use of these components will require 18” Wheels minimum. It is the responsibility of the customer to verify that their wheels will fit. Note: The factory supplied Temporary Spare Tire will no longer fit the front of the vehicle with this kit. If you have a flat front tire, we recommend placing the mini spare on the back and transferring an 18 inch wheel to the front.
Read the rest of this entry »

• 0 Comments

1. Unclip and remove the MAS (Mass Air Sensor) from the intake hoses.
2. Unclip and remove the electrical harness plug from the MAS and remove the MAS from the car.
3. Unscrew and remove the complete air box assembly.
Read the rest of this entry »

• 0 Comments

This kit was not designed to fit vehicles with a body lift.
TO START: 1. Turn off the ignition and disconnect the negative battery cable. NOTE: Disconnecting the negative battery cable erases pre-programmed electronic memories. Write down all memory settings before disconnecting the negative battery cable. Some radios will require an anti-theft code to be entered after the battery is reconnected. The anti-theft code is typically supplied with your owner’s manual. In the event your vehicles’ anti-theft code cannot be recovered, contact an authorized dealership to obtain your vehicles anti-theft code.
Read the rest of this entry »

• 0 Comments

TO START: 1. Turn off the ignition and disconnect the negative battery cable.
NOTE: Disconnecting the negative battery cable erases pre-programmed electronic memories. Write down all memory settings before disconnecting the negative battery cable. Some radios will require an anti-theft code to be entered after the battery is reconnected. The anti-theft code is typically supplied with your owner’s manual. In the event your vehicles’ anti-theft code cannot be recovered, contact an authorized dealership to obtain your vehicles anti-theft code.
Read the rest of this entry »

• 0 Comments

Ratcheting End Plug Removal:
Note: Prior to removing the ratcheting end plug from the bore, measure and note how deeply it is installed. The replacement plug should be installed to this same depth to ensure proper line pressure control. The most accurate method is to insert a slide caliper rod through the hole in the plastic plug until it bottoms against the control valve. Bring the caliper end toward the plug until flush. This gives you the spring height adjustment from the plug to the valve. Record this measurement before removing the plug and duplicate this distance during reassembly to most accurately duplicate the spring compression setting. If your caliper will not pass through the hole, measure from the valve body casting surface to the outer face of the OEM plug and duplicate later.
Read the rest of this entry »

• 0 Comments

The Dension Gateway Five lets you connect your iPod or USB storage (stick, hard drive or mass storage capable mp3 player) to your original car radio, providing music playback, menu based control and charging.
The Gateway Five also offers Bluetooth connectivity for music streaming (via A2DP) and handsfree mobile call handling via the original buttons and screens of your vehicle.
Read the rest of this entry »

• 0 Comments

EGO TS is the intelligent entry-level solution for telephone use in your car: simple to operate, elegant and compact – with Bluetooth and audio enjoyment too. The installation of your EGO TS in your car requires specialist knowledge and skills. We recommend that the installation be carried out in a qualified professional workshop. Before installation in your car, please make sure that your mobile phone is fully compatible with EGO TS. If you are uncertain, please consult your dealer or a professional workshop. Our service team will also be happy to help you with any information you may require. You can find further information on compatibility between EGO TS and various mobile phones on our website.
Read the rest of this entry »

• 0 Comments

The new RNS 510 radio navigation system from Volkswagen not only unites a host of multimedia functions, but it can also be combined with a “Premium” Bluetooth mobile phone preparation. Effective immediately, the RNS 510 can be ordered for the Touareg in the The RNS 510 from Volkswagen is easily and systematically controlled via a sensitive touchscreen display. Additional keys have also been provided to support this user-friendly concept. The new system has a high-performance processor which enables it to calculate routes extremely quickly and to display sections of a map in 16:9 format. An integrated 30 GB hard drive serves to store data for the navigation system and can also be used to save audio content (MP3 / WMA). The high-resolution display now enables maps to also be displayed in 3D, and delivers brilliant screen quality for the playback of photos and videos. In addition, the new RNS 510 can also display topographical map details, which is an especially useful feature for off-road driving.
Read the rest of this entry »

• 2 Comments