Installation Instructions
Note: If you are not familiar with this type of installation, you may want to consult a Service Trade Manual. The manual will also provide you a complete listing of torque specifications. Your Chrysler starter will bolt into place without any modifications. You will need to modify the transmission bellhousing to gain needed clearance for the starter nose.
Read the rest of this entry »

• 0 Comments

This kit will allow you to adapt a Chrysler 392 Hemi engine to all GM transmissions utilizing the Chevrolet bolt pattern. The use of this adapter kit will require a stock length torque converter. (A GM torque converter must be used with this adapter kit. It will not work with a Chrysler torque converter). Your Chrysler starter will bolt into place without any modifications. Reuse your OEM starter bolts.
Read the rest of this entry »

• 0 Comments

Transmission Service with the 1524 Transmission Flusher
The number one reason for transmission failure is fluid breakdown. Over time, the automatic transmission fluid (ATF) becomes contaminated and loses its viscosity and the ability to lubricate the moving parts within the transmission. Conventional service methods of dropping the pan and changing the filter result in only about 30-40% of the total ATF in the transmission being drained out. That leaves 60-70% of the old ATF to be mixed with the new ATF introduced during service. Therefore, adequate lubrication is not achieved.
Read the rest of this entry »

• 0 Comments

The Adapter Plate kit will allow you to use Buick, Pontiac or Oldsmobile and Cadillac 200, 350 and 400 Turbo-Hydramatic Transmissions with a Chevrolet engine. No alterations are necessary and installation is easy and simple.
NOTE: On some Turbo 400 transmissions, the webbing located inside the bell housing may interfere with two of the adapter plate kit bolts. Webbing must be trimmed to clear these bolts.
Read the rest of this entry »

• 0 Comments

Instructions
1. Remove old fitting
2. Retap existing hole with tap provided until tap bottoms out. (See Figure 1.)
3. Clean hole of any remaining chips
4. Install Sonnax adapter and tighten lightly. Leading edge of Sonnax cooler line adapter will seal where tap bottomed. (See Figure 2.)
Read the rest of this entry »

• 0 Comments

Wilwood components comprise the elements of the broadest coverage line of bolt-on disc brake kits available. Bolt-on brake kits consist of specially engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. Most kits are easily installed with the common hand tools used to perform routine brake service. A few kits do require some modifications to the spindle or axle to complete Read the rest of this entry »

• 0 Comments

This mount will provide a great reduction in transmission movement making shifting much more secure. With less transmission movement you’ll have less drivetrain slop as well, resulting in more power transmitted to the wheels. Upgraded engine mounts are recommended to be used in conjunction. Below are our installation guidelines for this item. Please review them carefully before attempting to install this product.
Read the rest of this entry »

• 0 Comments

The GROM AUX adapter – an integration between an MP3 player and a factory installed car stereo. Equipped with the specific vehicle harness and standard 3.5mm jack the GROM-AUX interface will allow you to connect your MP3/DVD/XM player or iPod / iPhone to the car stereo system easily.

Proper mounting location
Securely install the interface in a location that is free from heat, humidity, moving parts, or direct sunlight. Beware of hot airflow from your vehicle’s climate control system. We recommend securing the interface to a suitable location, free of sharp metal edges, using double-sided tape, Velcro, or wire ties.
Read the rest of this entry »

• 0 Comments

Modifying the radio may void any outstanding warranty it may have.
• This product is not affiliated with any of the OEM manufactures
• There are no warranties expressed or implied by purchase of this product
• While every care has been taken to provide a quality product, we cannot guarantee the Car2PC-HON1 adapter to function correctly if installation is not done according to the instructions in this guide
• We‘re not liable for misuse of this product. Misuse includes improper installation, damage to the board or radio while trying to install, and illegal use of the modified radio
Read the rest of this entry »

• 0 Comments

The GROM iPod adapter is designed to provide endless hours of listening pleasure through most vehicles factory radio. To insure that your iPod performs correctly in your car or truck, we recommend that you read this entire manual before attempting install the GROM interface.

Proper mounting location
Securely install the interface in a location free from; heat, humidity, moving parts or direct sunlight. Beware of hot-air flow from your vehicle’s climate control system. We recommend securing the interface to a suitable location, free of sharp metal edges, using double sided tape, Velcro or wire ties.
Read the rest of this entry »

• 0 Comments