VW captured major attention and significant sales when it brought out its New Beetle in 1998. As the Bug’s popularity
began to flag, new versions such as the Turbo S were unveiled. But what could generate renewed interest more than a
convertible model? When the droptop Bug hit the streets in 2002, heads were turning and wallets were being reached for
once again. The Beetle convertible comes in GL and GLS trim levels. As with other VWs, the GLX model has been
discontinued for 2004. The GL and GLS can be equipped with a 115-hp, 2.0-liter four-cylinder or a 150-hp, 1.8-liter
turbocharged inline four. A five-speed manual transmission is standard, and a six-speed automatic is optional. New color
combinations are added for 2004-along with new wheels-and a Monsoon audio system is now standard on the GLS. The
power top comes down in 13 seconds.
Read the rest of this entry »

• 1 Comment

Motor vehicle theft is a serious problem in many parts of the world. In the United States, the annual loss from car theft is over $4 billion. The Automotive Information Council reports that over one million motor vehicles are stolen in the U.S. each year. That’s one motor vehicle theft every 31 seconds.
Read the rest of this entry »

• 0 Comments

This blower motor has undergone some changes in design so the installation procedures have also changed. The original motor was a two piece motor and the wheel was secured with a set screw. GM changed the design to a one piece unit with a fiberglass heat shield and the wheel is pressed on. On some of the models you may need to remove the front cradle bolts so the engine can be rocked forward. This will help keep the valve cover from interfering with the blower motor replacement. On all models; disconnect the negative battery cable.
Read the rest of this entry »

• 0 Comments

The intent of this bulletin is to provide technicians information regarding the proper installation of the Heating, Ventilation and Air Conditioning (HVAC) Module blower motor (with impeller) assembly.
The current available HVAC Module blower motor for the above listed vehicles can be identified by the three mounting holes (1). The original equipment blower motor had five mounting holes.
In order to avoid confusion and ensure a high level of customer satisfaction, when replacing an HVAC Module blower motor, refer to this bulletin for the appropriate procedure.
Read the rest of this entry »

• 0 Comments

Subject: Starter motor Failure
Model: Ford 2.0 TDCI FWD & 2.4 TDCi RWD/2.0 TDCi FWD
On inspection, the units do not exhibit any manufacturing defects. The premature failure of the unit is due to contamination of the pinion/drive area from metal dust particles produced within the Dual-mass Flywheel, when the clutch wears or becomes overheated. During scheduled servicing, it is recommended that the clutch is checked and if found to be showing signs of wear should be replaced.
Read the rest of this entry »

• 2 Comments

This Fast Response Circuit is designed specifically for use with DODGE D-Series Motor Brakes. It will allow the brake to provide a faster drop out time (time to braking). Part number 031386 is for use with 115/230 VAC brake coils. Part number 031389 is for use with 230/460 VAC brake coils.
Read the rest of this entry »

• 0 Comments

Toothed Belt Special tools, testers and auxiliary items required Engine support bridge 10-222 A ( guide 10-222 A/21 changing ) Adapter 10-222 A/8 Torque wrench V.A.G 1331 Torque wrench V.A.G 1332 Pin wrench T10020 Changing the Engine Support Bridge 10-222 A . Guide 10-222 A/21 The engine support bridge 10-222 A is needed to support the engine/transmission subassembly. A new bore is required for securing the adapter 10-222 A/8 to the guide 10-222 A/21 . Dimensions in mm. Drill a 12.5 mm diameter hole – arrow – into the guide 10-222 A/21.
Read the rest of this entry »

• 0 Comments

Branding is the mechanism whereby a business/person aligns itself with a service or product from which it perceives benefit and value. In using the RMI branding in your business there is a two-fold purpose in that members align themselves with the RMI and the Code of Conduct, and in turn the RMI encourages through their media interface, peace of mind to consumers in dealing with businesses who are RMI members. The RMI brand has become more visible in recent years through its interaction in many business spheres, but most importantly through its media interface with consumers in both radio and newspaper advertising campaigns. Consumers are being made aware of the value in dealing with businesses aligned with an organisation, who also has their interests in mind.
Read the rest of this entry »

• 0 Comments

Instructions
Before removing any parts, park the car on a secure, stable and level surface, loosen (but do not remove) the wheel lug nuts, jack the vehicle up and place the car on four stable jack stands or use a professional vehicle lift. We recommend having two people available for certain steps of the installation.
Front Install Instructions
1. Securely support both front corners of the car.
2. Remove front wheels.
3. Disconnect link on ride height sensor to prevent damage.
4. Disconnect hydraulic suspension line and drain in to pan. Remove line from bulkhead mounting plate
5. Remove the Lower Front shock clevis bolt that attaches the fork of the shock to the lower front control arm.
Read the rest of this entry »

• 0 Comments

This Bentley Manual is a comprehensive source of service information and specifications for the Porsche Boxster and Boxster S from 1997 to 2004. The aim throughout this manual has been simplicity and clarity, with practical explanations, step-by-step procedures and accurate specifications. Whether you’re a professional or a do-it-yourself Porsche owner, this manual will help you understand, care for and repair your Boxster.
Read the rest of this entry »

• 0 Comments