Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although the instructions in this guide explain how to install the Terk TRK-SR2 Roof-Mount Satellite Radio Antenna in a general sense, they do not show the exact installation methods for your particular vehicle. IMPORTANT: If you are not comfortable performing a complex installation, ask your local mobile audio dealer about professional installation options.
Read the rest of this entry »

• 0 Comments

Do you have a mobile antenna for that new car but don’t want to drill any holes? Here’s a great solution that adds the convenience of antenna matching built right into the mount. For years I’ve tinkered with electronic projects at home. Two things have started to impact the fun: a harder time focusing up close (since I turned 50) and the fact that parts are getting smaller. One way around this is to concentrate on physically larger projects—like antennas and related items. I needed a simple antenna mount that could easily attach to my new Volkswagen Beetle without drilling holes. I wanted this antenna mount to support most mobile HF antennas, especially a Hamstick or Carolina Bug Catcher, since these are my current antennas. Additionally, I wanted the mount to include internal capacitive matching which is normally required for short antennas.
Read the rest of this entry »

• 3 Comments

For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove bumper from bumper brackets. Retain fasteners.
2. Remove bumper brackets from frame. Diesel and V10 applications: On these applications you must first remove the top two intercooler fasteners. Then push intercooler up and out to provide clearance to remove bumper bracket bolt assembly.
Retain fasteners.
Read the rest of this entry »

• 0 Comments

Read instructions before assembling. Fasteners should be finger tight until instructed to tighten according to the torque chart. Use standard methods and practices when attaching snowplow including proper personal protective safety equipment.

INSTALLATION INSTRUCTIONS
NOTE: For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove license plate bracket and retain for vehicle owner. Remove bumper from bumper brackets. Retain fasteners.
Read the rest of this entry »

• 0 Comments

1. Unplug all lights and harnesses connected to factory bumper and remove from truck frame.
2. Remove factory tow frame to install new Top Gun rear bumper. In order to remove tow frame, the bed of the truck has to be loosened on lifted 6 inches off the truck frame. Remove 4 bolts towards the rear of the bed, end loosen but do not remove the 2 bolts towards the front of the bed. Lift bed and remove towing frame.
Read the rest of this entry »

• 0 Comments

Read and understand these instructions BEFORE attempting to install this product
1) Getting Started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) If engine has run with in the past two hours let it cool down.
d) Disconnect negative battery terminal. ~:
e) Raise front of truck and support with properly rated jack stands.
f) Remove passenger side, front tire.
Read the rest of this entry »

• 0 Comments

Ford Motor Company and your selling dealer thank you for selecting one of our quality products. Our commitment to you and your vehicle begins with quality protection and service. When you need warranty repairs, your selling dealer would like you to return to it for that service, but you may also take your vehicle to another Ford Motor Company dealership authorized for warranty repairs.
Read the rest of this entry »

• 0 Comments

This manual is divided into different areas to assist you with your installation and operation of your braking unit. We strongly suggest that you write down the kit and serial numbers of your unit in the spaces provided and retain this manual for any future reference
Kit Contents
2033135 – 1988-1998 Dodge Cummins 12V Exhaust Brake Kit
1 1230030 Vacuum Control Kit (w/ Micro Switch)
1 1230335 Vacuum Spool Valve Kit
1 2133030 Exhaust Brake
Read the rest of this entry »

• 0 Comments

Do not install the kits listed below on 2003 model year Dodge trucks built up to June 27th 2005 with automatic transmissions without a transmission controller. Pacbrake has kits for these vehicles that include an automatic transmission controller.

C44031 Pacbrake kit is a PRXB design for 2003 model year and newer Dodge trucks built up to January 4th 2004 with a Cummins 5.9L and manual shift transmission only.
Read the rest of this entry »

• 0 Comments

1. For the Dakota: Remove bumper, retaining all OEM fasteners for reinstallation.
Proceed to Step 2.
For the Durango: Prior to removing the bumper, cut and remove the center portion of the bumper and air dam as shown in the photo below. Retain the cut out section of the air dam to fabricate an air deflector in Step 8. Remove the remaining bumper assembly, retaining all OEM fasteners for reinstallation.
2. Clamp the driver-side mount plate to the outside of the driver-side vehicle frame. Make sure the mount alignment tab fits up against the back of the vehicle frame front plate, and the front and rear plate stiffeners are snug against the bottom of the frame. When positioned correctly, mount plate holes align near the center of the vehicle frame.
Read the rest of this entry »

• 0 Comments