Volkswagen > A3 Platform > 1993 – 2002 2.0 Liter 4-Cyl. 2V Fuel Injection & Ignition, Engine Code(s): ABA m.y. 1996-1999 28 – Ignition/Glow plug system Ignition coil power output stage, checking Special tools, testers and auxiliary items VAG 1598/18 test box Multimeter (Fluke 83 or equivalent) VAG 1527B voltage tester Connector test kit VW 1594 Wiring diagram Checking voltage supply Disconnect 3-pin connector from ignition coil. Connect multimeter using test leads from VW 1594 to measure voltage at terminals 1 and 3 of connector. Turn on ignition. Measure voltage between terminals 1 and 3. Specification: 9-14.5 volts Turn off ignition. If the specification is not attained: Check wire Read the rest of this entry »

• 0 Comments

The Mk. II Volkswagen Golf and Jetta range of models was bucket tappets, the Digifant, Digijet and Mono-Jetronic fuel injection introduced in March 1984, revised body and trim features being the systems, the 16-valve engine fitted to the GTi variant, the fully main visual difference to the earlier range of models. electronic ignition system (FEI), the 085 5-speed gearbox and several The engine/transmission is mounted transversely at the front of the other minor modifications and revisions. As with earlier models the new range is proving popular, giving vehicle, drive being to the front wheels. Detailed improvements have been made throughout the years of manufacture to improve power economy, reliability, comfort and, if previous models can be used as a yardstick, long life. output and economy. These include the introduction of hydraulic. Your Volkswagen Golf and Jetta Manual
Read the rest of this entry »

• 0 Comments

The Crane HI-6DI2 part number 6000-6500 is a CD ignition with two independent coil outputs. The unit is intended for distributorless applications such as the Diamond Star Motors (DSM) Mitsubishi engine used in Eclipse, Eagle Talon and Plymouth Laser as well as most other four cylinder distributorless engine applications with two coils. Two HI-6DI2 units can be used for Ford 4.6L V8 distributorless engine applications. The HI-6DI2 is 50 states legal for 1995 and prior years distributorless vehicles without OBD II on board diagnostics (CARB E.O. D-225-57).
Read the rest of this entry »

• 0 Comments

The Jet Performance Module is designed to enhance the performance and drivability of your vehicle. By optimizing the air/fuel ratio, ignition advance and various other parameters. The Jet Module retunes your engine for maximum performance.
JET STAGE 1 MODULE:
The Jet Stage 1 Module is optimized for stock vehicles. Minor bolt on modifications such as free flow air filters and cat back exhaust systems will work with the stage 1 tuning. Premium fuel is recommended for best performance gains, but for normal light driving, lowgrade or midgrade fuels may be used.
JET STAGE 2 MODULE:
The Jet Stage 2 Module is optimized for modified vehicles. The stage 2 requires premium fuel and the use of a Jet 180 degree thermostat. We also recommend a cat back exhaust system. The stage 2 will work well with headers, free flow air intake systems and filters.
Read the rest of this entry »

• 0 Comments

The MSD Digital DIS-2 Plus Ignition can be used on 4-cylinder engines equipped with two dual output coils. The DIS-4 Plus Ignition can be used on 4, 6 or 8-cylinder engines equipped with up to four dual output coils. The Ignitions will accept trigger inputs from electronic distributorless type ignition systems.
NOTE: It is recommended that you have the Service Manual and wiring diagram for your vehicle before beginning the installation of the MSD DIS Ignition.
Read the rest of this entry »

• 0 Comments

Congratulations on your purchase of the AWE Tuning Exhaust System for the 00-> VW Golf/Jetta/New Beetle with 1.8T or VR6 engine. Exquisite build quality with industry leading performance distinguishes this exhaust system from all others. Our system also features complete T304 Stainless Steel construction, including the internal parts of the muffler. Installation of this exhaust can be completed on jack stands or ramps. Never work under a vehicle only supported by a jack. If you do not feel comfortable installing this system yourself, contact a local professional for installation.
Read the rest of this entry »

• 0 Comments

This procedure is required if keys are lost, a replacement Engine Management ECM is fitted, new or additional ignition (transponder) keys needs to be matched to the vehicle. When transponder (ignition) keys are matched to the vehicle the key data is stored in the memory of the immobiliser ECU and used to recognise and validate the ignition keys. The matching of ignition (transponder) keys to a particular vehicle requires the use of the following functions: Login ECM and Adaptation. The Login ECM function enables the technician to enter the 5 or 7 digit login code. A valid login code must be entered in order to program new ignition (transponder) keys for all VAG cars. The Adaptation function enables the technician to adapt new and additional ignition (transponder) keys.
Read the rest of this entry »

• 0 Comments

Due to differences in manufacturing, dimensions and inflated measurements, tire and wheel combinations should be test fit prior to installation. Tire and wheel choice is crucial in assuring proper fit, performance, and the safety of your Pro Comp equipped vehicle. For this application, a wheel not to exceed 10” in width with a minimum backspacing of 3.25” must be used. Additionally, a quality tire of radial design, not exceeding 33” tall X 12.5” wide is recommended. Please note that the use of a 33” X 12.5” tire may require fender modification. Violation of these recommendations will not be endorsed as acceptable by Pro Comp Suspension and will void any and all warranties either written or implied.
Read the rest of this entry »

• 0 Comments

The BD X-Tuner Power Programmer is for 2003-2005 Dodge Ram trucks equipped with a 5.9L Common Rail Cummins turbo diesel engine. The X-Tuner is a very simple instrument to operate. All procedures take place in the comfort of your cab with the downloader hooked up to the OBD II (On Board Diagnostics) port. Operating this downloader does not require any mechanical background.
Read the rest of this entry »

• 0 Comments

The Ford – Ignition Start Control’s (ISC) will prevent start-up backfire during alternate fuel operation. The controller delays the ignition until the Ford OEM computer synchronizes with the cam sensor and generates no waste spark.
Read the rest of this entry »

• 0 Comments