Simple step to light reset service for Renault Laguna. The reset button is located under the speedometer on the instrument cluster.
Switch ignition on.
Switch ignition on.
Press reset button until “spanner” symbol flashes.
Keep button depressed until “spanner” symbol stops flashing and remains
illuminated.
Read the rest of this entry »

• 0 Comments

The lamp illustrated is an oil level low warning indicator and not a service interval indicator. When the engine oil is at the correct level, this lamp will automatically extinguish. Malfunction Indicator Lamp (MIL) The lamps illustrated above, are Malfunction Indicator Lamps (MIL) and not service interval indicators. When illuminated there is a problem with the vehicle. Refer to manufacturer’s documentation for further information.
Read the rest of this entry »

• 0 Comments

Alfa Romeo, Fiat and Lancia oil service and oil degradation reset tool. Compatible with the latest Fault Tolerant CAN vehicles. Designed to extinguish the oil service light and to show if there is a fault on the CAN bus which is a common problem with some vehicles.

▪ Compatible with latest Fault Tolerant CAN vehicles.
▪ Also compatible with Alfa Romeo Mito, Fiat Punto 05 , Grand Punto & 500.
▪ CAN BUS Fault indicator.
Read the rest of this entry »

• 0 Comments

This Service & Airbag Reset Tool allows you to reset your car’s Airbag Fault Light & Service (Oil Service & Inspection Service) Indicators on VW/Audi/Seat/Skoda manufactured from 1994 to the latest one that using CAN-BUS protocol, please read the Compatible Vehicles for detail models.
Read the rest of this entry »

• 0 Comments

This bulletin supersedes TSB 06-40-005 to include a procedure for GDS. CAUTION: Before replacing a transaxle to improve a shift quality condition, follow this procedure to reset and relearn the adaptive learning.
DESCRIPTION: The PCM or TCM contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and “relearn” the PCM/TCM adaptive values. After the following repairs have been completed, the PCM/TCM adaptive values must be reset in order to provide optimum shift quality:
Read the rest of this entry »

• 0 Comments

Whenever an automatic transmission is replaced, overhauled or individual components are replaced, use this procedure to clear Engine Control Module (ECM, SAE term: Powertrain Control Module, PCM) “Learned Values” to minimize subsequent performance concerns. CAUTION: Failure to follow the procedure below may lengthen the time to readjust the ECM “Learned Values,” potentially resulting in performance concerns.
Read the rest of this entry »

• 0 Comments

Instructions:
• Ignition ‘Off’.
• Plug into car socket.
• Select program.
• Ignition ‘On’.
• Press memory key.
• LED ‘Off’ comes on again after approx. 10 seconds.
• Ignition ’Off’ + ‘On’.
• Car display cleared
Read the rest of this entry »

• 0 Comments

After car crash and airbag deployment, VW-Audi airbag sensor can by locked (Control unit faulty or deployed) and must be replaced. Even after small accident Airbag sensor will write in internal memory special error message “crash data stored” or “computer fault” and after you need to exchange very expensive sensor to new one. With our VAG Airbag Reset Tool you can reset and repair airbag computer in your office in 1 minute. No need to remove airbag sensor from the car.
Read the rest of this entry »

• 0 Comments

Tools you need: • Torx T-20 • Socket wrench size M10 • Small screwdriver • Chalk or pencil (if you want to put some marks on the bodykit to fix it exactly as it was) • A bucket to store the washer fluid (remember: it might be upto 6.5 liters!) • Old soft blankets, wood blocks or a friend to lend a helping hand to avoid scratches to the bumper paint
Read the rest of this entry »

• 0 Comments

Nissan has determined that some 2007 model year Armada and Titan vehicles may have been equipped with TPMS sensors designed for the previous model year vehicle. The TPMS is functional and detects low tire pressure as designed. However, in some vehicles, this condition could, at some point, cause the low tire indicator lamp to illuminate even if the tire pressure is not low. The TPMS would continue to operate normally if reset. To correct this potential condition, Nissan will conduct a Voluntary Service Campaign to inspect the valve stem cap to Read the rest of this entry »

• 0 Comments