Rear lid trim Tools Special tools, testers and auxiliary items required Lower rear lid trim, assembly overview (Golf) 1. Lower trim panel Removing 70-5, Lower rear lid trim, removing and installing (Golf) 2. Rear lid 3. Screws Qty. 2 4. Nuts Qty. 2 5. Clips Qty. 10 6. Upper trim Lower rear lid trim, removing and installing (Golf) Removing – Remove screws – 1 – in grip depressions. – Slide Wedge T10039/1 between trim – 2 – and lid – 3 – . – Remove trim out of mounts in lid. Start at lower edge of lid. – Remove side straps – 4 – from upper trim
Installing – Installation is reverse of removal. Note: Before installation, securing clips must be checked for damage and replaced if necessary. Upper rear lid trim, assembly overview (Golf) 1. Upper trim panel Removing 70-5, Upper rear lid trim, removing and installing (Golf) 2. Rear lid 3. Guide pins Qty. 4 4. Securing clips Qty. 2 5. Bracket for rear shelf Qty. 2 left and right 6. Spreader pins for bracket Qty. 2 left and right 7. Clips Qty. 4
Upper rear lid trim, removing and installing (Golf) Removing – Remove lower rear lid trim 70-5, Lower rear lid trim, removing and installing (Golf) . – At right and left sides, remove spreader pin – 1 – from rear shelf bracket – 2 – . – Using Wedge T10039/1 , lift trim at sides out of mounts in lid – arrow A – . – Using Lever T10039 , lift trim at upper edge out of mounts – arrow B – . Note: Before installation, securing clips must be checked for damage and replaced if necessary.

Source

Related Tags: arrow, assembly overview, depressions, golf 2, guide pins, necessary source, nuts, rear hatch, screws, shelf bracket, side straps, special tools, trim assembly, upper edge, volkswagen, volkswagen golf