Rear brakes – disc brake, servicing Rear brake – Girling disc brake for vehicles with Front and All-Wheel Drive, servicing Axle beam Hex socket head bolt, 10 Nm Wheel speed sensor For vehicles with ABS only Insert with solid lubricant G 000 650 Bracket for brake hose Hex socket head bolt, 65 Nm Hex bolt, self-locking, 35 Nm Replace When loosening and tightening, counter-hold at guide pin Guide pins Protective cap Brake pad securing spring Always replace when pads are replaced
Cover ring Distance collar – cover ring to cover plate 9.5 mm Brake carrier with guide pins and protective cap Supplied as pre-assembled replacement part with sufficient grease on guide pins If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate guide pins Brake pads Thickness 12 mm Checking thickness: Repair Manual, Maintenance Wear limit: 7 mm (including backing plate) Must always be replaced together on both sides of axle
Removing and installing 46-3, Brake pads, removing and installing Hex bolt, 23 Nm (for USA vehicles only) Vibration damper (for USA vehicles only) Brake caliper Servicing 47-4, Rear brake caliper, servicing After servicing or replacing, parking brake cable must be adjusted first. Foot brake must not be operated beforehand! Adjusting parking brake 46-3, Parking brake – disc brake, adjusting Outer wheel bearing Hex nut Adjust wheel bearing play; thrust pad must be movable when applying finger pressure on screwdriver without prying 42-3, Adjusting wheel bearing play Secure with castle nut and new pin.

Source

Related Tags: castle nut, finger pressure, foot brake, guide pin, guide pins, head bolt, hex bolt, hex nut, hex socket, manual maintenance, parking brake cable, passat b4, protective cap, protective caps, rear brake caliper, rear brakes, socket head, vibration damper, vw passat, wheel speed